This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

Fuel Filter - Parts Master/gki - OE Type (Part Number: 73097)

  • Price:   $  15.79

  • Availability: In Stock

Check The Fit

Customers also purchased

Product Details

Manufacturer:
Parts Master/gki
Part Number:
73097
Manufacturer Part Number:
73097
Description:
Fuel Filter
Long Description:
Part Type:
Fuel Filter
Category:
Air And Fuel Delivery
Subcategory:
Filters
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
0.518 lbs.
UOM:
EA
Quantity Sold:
Sold individually
Minimum Order Qty:
1

Specifications

FAQ Q12 Q
Do all throttle bodies have an ice breaker mode for extreme cold starts?
FAQ Q2 Q
How do you test?
FAQ Q8 A
Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.
FAQ Q13 A
The throttle body is also utilized as part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.
FAQ Q3 A
We inspect and replace all damaged and worn components, including sensors, gears, connectors, seals, as well as certain components 100% of the time based on durability and function.
FAQ Q5 Q
What happens when an Electronic Throttle Body fails?
FAQ Q4 Q
What's an Electronic Throttle body?
Gasket or Seal Included
Yes
Product Condition
Remanufactured
Troubleshooting Tip
Engine intermittent start then stall
Troubleshooting Tip
Intermittent reduced engine power
Troubleshooting Tip
Throttle position sensor codes stored
FAQ Q9 Q
Do you sell throttle body spacers?
FAQ Q10 Q
The OE throttle body has coolant hoses attached. What's the purpose?
Housing Color/Finish
Gray/Unfinished
Throttle Position Sensor Included
Yes
Troubleshooting Tip
Delayed or no throttle response when depressing accelerator
Troubleshooting Tip
Low idle RPM
Troubleshooting Tip
Suspect accelerator pedal position codes stored
FAQ Q7 Q
Is there anything that has to be done after installing the replacement throttle body?
FAQ Q12 A
Not all throttle bodies have this feature where the throttle valve is reversed from its normal movement by the controlling module to break up any ice formation between the throttle bore and valve. This feature is based on application.
FAQ Q9 A
We do not sell Throttle Body spacers nor do we recommend the use of a spacer.
FAQ Q3 Q
What do you replace?
Throttle Body Outlet Shape
Round
Troubleshooting Tip
Hesitation
Troubleshooting Tip
Suspect intake air temp sensor codes stored
FAQ Q8 Q
Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
FAQ Q1 Q
How do you clean?
FAQ Q2 A
Position sensors are tested to match OE characteristics throughout entire range and final assemblies are tested for all critical functions, including response time and airflow at multiple points.
FAQ Q10 A
The purpose of the attached coolant hoses is to keep the throttle body warm by the transfer of heat from the coolant to the housing preventing moisture from freezing between the throttle body bore and throttle valve during extreme cold temperatures.
FAQ Q6 Q
What causes the Electronic Throttle Body to fail?
Housing Material
Aluminum
Package Contents
Throttle Body, Instruction Sheet
Troubleshooting Tip
Suspect mass air flow sensor codes stored
FAQ Q11 Q
Is it ok to bypass the coolant hoses?
FAQ Q11 A
No bypassing of coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following OE supersessions where the pipes have been removed and instructions are provided for rerouting coolant hoses.
FAQ Q6 A
The most common failure in an Electronic Throttle Body is the integrated Throttle Position Sensor. The ETB is equipped with high and Low voltage reference Throttle Position Sensor for redundancy. Either one of these sensors could fail or possibly both.
FAQ Q1 A
We use an ultrasonic cleaning system with a rust-inhibiting detergent to clean the plate and bore. For the exterior we use a glass bead blasting process. We also go through further disassembly for cleaning of internal components.
FAQ Q13 Q
What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
FAQ Q5 A
When an Electronic Throttle Body fails, the controlling module will illuminate the MIL/SES/CEL, the module will then activate a fail-safe mode operation and gradually reduce the engine's speed back to an idle rpm.
Product Line Marketing Stmt
CARDONE Industries, Inc. is the remanufactured parts supplier to the O.E.Ms. We are the only remanufacturer in the world with over 45 years' experience in mechanical, hydraulic and electronic parts repair. Through reverse-engineering, our product engineers are able to determine where - and why - original parts fail. We re-engineer our A1 CARDONE(R) Reman parts for stronger, longer-lasting performance. We build it better. Learn more at Cardone.com.
Throttle Body Actuation Type
Electric
Throttle Body Inlet Shape
Round
Troubleshooting Tip
Consistent reduced engine power
Troubleshooting Tip
Engine surges
Troubleshooting Tip
Idle RPM hunt or erratic idle
E-Waste
Yes
FAQ Q7 A
A relearn calibration procedure is necessary after installation of replacement throttle body.
FAQ Q4 A
The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicles Powertrain Control Module or Throttle Actuator Control Module.
Troubleshooting Tip
Common signs of wear indicating replacement may be required:
Troubleshooting Tip
Erratic transmission shift points
Key Words
Throttle Body, Throttle, Fuel Injection Throttle Body
Marketing Description
Every CARDONE Electronic Throttle Body is first disassembled and meticulously inspected. Then, each component is inspected, remanufactured or replaced, resulting in reliable and consistent performance. Every ETB is tested for all critical functions, including response time and airflow at multiple points. A proprietary cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow and peak performance.
Product Description
Remanufactured Throttle Body
Remanufactured Part
Y

The PARTS MASTER/GKI Fuel Filter contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
2008MercuryMariner3.0L

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.

All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.

Under NO circumstances will our liability exceed the amount of the original sale.

Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.

The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.

All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.

Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.



Can't find what you are looking for? Try searching by one of these methods below.